Experimental study on free and submerged multi-jets

The flow characteristics of the hydraulic jump due to parallel jets are different from the classical jump emerging from a single gate. Due to the highly complex flow field at the downstream pool, deciding about the tailwater measuring location is a challenging issue affecting the flow measuring accuracy. Experiments are conducted herein, on different parallel jets’ configurations for both free and submerged flow conditions. To quantify the flow uniformity, for any downstream cross section, the associated momentum correction factors, β₂, were estimated for the free-flow condition. It is found that β₂-values depend significantly on the measuring location, and consequently the available conjugated depths relationship results in poor estimation when measuring location moves downstream. Employing Buckingham analysis, a general formula is proposed to calculate the momentum correction factors associated with the free hydraulic jump at different downstream measuring locations. The experimental results of this study indicated that such a formula enhances distinguishing between free and submerged flow conditions of the gates installed in parallel. Finally, a dimensionless stage-discharge formula is presented to predict the submerged flow rate through parallel gates of different gate openings and widths.     

基于卡滞响应的翼面偏转自动切换技术

为了验证水陆两栖飞机结构对CCAR-25-R4部25.305,25.307条款要求的符合性,要求当全机加载到限制载荷时,需要在规定时间内一次性获取活动翼面的最大正负偏角。针对此问题,提出了基于卡滞响应的翼面偏转自动切换技术,并将该方法应用于大型灭火/水上救援水陆两栖飞机稳定俯仰2.5 g工况限制载荷静力试验中,顺利完成了试验。试验结果表明,该方法是可行和有效的,同时为后续试验提供技术支撑。     

含有蓄能器的液压伺服系统动态特性仿真设计

该文以一类常见的电动液压能源为对象,建立了含有蓄能器的电动液压能源的仿真模型,并对能源的启动特性以及负载工作所要求的多种信号的跟踪能力进行了仿真分析。     

In situ synthesis,structure, and properties of a dendritic branched nano-thickening agent for high temperature fracturing fluid

The aim of this work was to prepare a novel dendritic branched nano-thickening agent by free radical polymerization of acrylamide (AM), acrylic acid (AA), sodium p-styrene sulfonate, dimethyl diallyl ammonium chloride, and multiwalled carbon nanotubes. The as-synthesized nano-thickening agent was characterized by Fourier transform infrared, Raman spectra, transmission electron microscope, ¹H-NMR, and thermogravimetric analysis (TGA). Compared with the pristine polymer and partially hydrolyzed polyacrylamide (HPAM), thickening capacity, temperature resistance, and salt tolerance properties of the nano-thickening agent considerably improved, and the viscosity of 0.5% nano-polymer solution was 126.5 mPa·s. Additionally, the properties of the nano-gel prepared by nano-thickener, such as temperature and shear tolerance, viscoelasticity, sand carrying capacity, and gel breaking performance, were evaluated showing the satisfactory performance of the nano-gel under high temperature condition. The results indicated that the nano-thickener has potential applications in the field of oil and gas production. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48446.     

斗轮取料机液压控制系统的故障分析及改进

针对臂式斗轮取料机运行中抖动现象,进行了故障分析和排除,并对其液压原理和元件选型进行了优化及改进,为相关液压系统的故障分析和设计选型提供参考。     

引水式水电站变顶高尾水洞水力特性和体型优化

考虑引水式水电站常用的有压尾水洞和变顶高尾水洞两类布置型式,采用基于特征线法的有压管道瞬变流分析模型和适用于明满流过渡过程分析的改进狭缝法模型,分别分析系统的过渡过程特性和尾水洞体型参数的敏感性,研究不同的尾水洞型式下尾水系统的水力特性,进一步揭示了变顶高尾水洞的底宽、洞高和顶坡对尾水管进口最小内水压力的影响规律。结果表明,与增大面积的有压尾水洞比较,变顶高尾水洞是一种可行的布置型式,可有效提高尾水管进口的最小内水压力且水锤过程衰减较快;合理增大变顶高尾水洞底宽、洞高或顶坡均可不同程度地改善尾水管进口最小内水压力,其中顶坡的影响相对明显,为体型优化设计提供了参考依据。     

基于RBF网络滑模的电动助力制动系统液压力控制

针对汽车电动助力制动系统（Electro-booster，EBooster）的液压力控制中液压负载的非线性和不一致性问题，提出一种基于径向基函数（Radial based function，RBF）神经网络的滑模变结构控制方法。设计EBooster系统压力控制架构，建立液压制动系统等效结构简化模型，据此设计基于RBF网络滑模变结构的液压力控制方法，通过设计RBF网络的自适应律来实现系统滑模控制参数的自适应调整，并利用李雅普诺夫函数方法分析算法的稳定性。最后搭建电动助力制动系统的快速原型试验平台来验证算法的有效性。试验结果表明，采用RBF神经网络滑模变结构的控制策略对电动助力制动系统液压力的控制误差在2%以内，具有良好的控制效果。研究成果为EBooster系统的压力控制提出一种具有良好自适应性的算法设计思路。     

摇篮式五坐标加工中心C轴转台旋转故障原因分析与处理

针对HS664RT,摇篮式五坐标加工中心力矩电动机驱动的C轴转台故障,介绍了故障排查、处理方法和力矩电动机相位角同步设置步骤。     

压裂水平井产能预测方法研究进展

水平井压裂技术在低渗透及非常规储层中得到了广泛应用,压裂后水平井的产能预测关系到油田开发方案的制定,因此,国内外学者对压后渗流模型的建立和求解方法做出了不懈的努力。本文详细回顾了国内外学者所建压裂水平井产能预测模型及求解方法,指出了不同模型和求解方法的优缺点,并展望了压裂水平井产能模型的发展方向。     

极限工况下的管网“互联互通”改进方案

在全国天然气管道“主干互联、区域成网”(以下简称“互联互通”)基础格局逐渐形成的背景下,天然气管网规模日益扩大、管道分支和气源增加,并且分布不集中、输送方向可变,使得输气方案更加灵活,可以更好地解决某些地域的供气紧张问题;但受现有站场和设备的限制,暂不能满足某些多线组合极限工况,使得“互联互通”的初衷难以全部实现。为了使得现有的各输气干线在实现“互联互通”之后可以满足更多的多线组合工况,在分析“互联互通”背景下M管网工况变化的基础上,研发了可以进行水力仿真和压气站方案制订的计算软件,并对3种极限工况下的不同输气量情况进行了可行性试算,进而基于试算结果提出了相应的管网改进建议。研究结果表明:(1)经验证,软件计算误差满足要求;(2)在M管道某处增设压气站或在某些输气站场配置压缩机组;(3) M管网改进调整后,可以完成大部分的多线组合极限工况,真正实现“互联互通”的输气方案。结论认为,该研究成果有助于推进全国天然气管网早日实现“互联互通”。